Engine oil level check:
1. Park the bike firmly on center stand. If you just
rode the vehicle, allow it to cool for few
minutes so that oil will come back to the sump.
2. Remove gauge oil level (Dipstick) from the
cover clutch.
3. Wipe off the oil from dipstick and insert to the
oil filling orifice. Now take out and check for
engine oil level. The level should be between
minimum and maximum level.
4. Repeat previous steps once again to confirm oil
level. Reassemble the dipstick and tighten.
MAINTENANCE
It is recommended not to disturb the air screw when the
engine performance is good.
G
Idling RPM : 1600 ± 100
30
To Next Page
Loading...
