TYAN S7002 - Page 53

http://www.TYAN.com
53
3.7.2 - IDE Configuration Sub-Menu
You can use this screen to select options for the IDE Configuration
Settings. Use the up and down <Arrow> Keys to select an item. Use the
<Plus> and <Minus> Keys to change the value of the selection options.
Feature Option Description
Auto
C1
C3
C6
C State package limit
setting
C7
Selected option will program into C state
package limit register.
Enabled
C1 Auto Demotion
Disabled
When enabled, CPU will conditionally
demote C3/C6/C7 requests to C1 based
on uncore auto-demote information.
Enabled
C3 Auto Demotion
Disabled
When enabled, CPU will conditionally
demote C6/C7 requests to C3 based on
uncore auto-demote information.
BIOS Setup Utility
Main Advanced PCI/PnP Boot Security Chipset Exit
IDE Configuration
SATA#1 Configuration
Configure SATA#1 as
Primary IDE Master
Primary IDE Slave
Secondary IDE Master
Secondary IDE Slave
Third IDE Master
Fourth IDE Master
Hard Disk Write Protect
IDE Detect Time Out (Sec)
[Compatible]
[IDE]
[Not Detected]
[Not Detected]
[Not Detected]
[Not Detected]
[Not Detected]
[Not Detected]
[Disabled]
[35]
Options
Disabled
Compatible
Enhanced
← → Select Screen
↑↓ Select Item
+/- Change Option
F1 General Help
F10 Save and Exit
ESC Exit