TYAN S7002 - Appendix: How to Make a Driver Diskette

http://www.TYAN.com
91
Appendix: How to Make a Driver Diskette
Follow the steps below to make a driver diskette from the TYAN
®
driver CD
provided.
1. Start the system and insert the TYAN
®
CD into the CD-ROM drive to boot
from CD. You will see the following menu. Then press [1] and [Enter] to
boot the system to TYAN
®
diskette maker. (If you would like to boot from
hard disk, press 0 and Enter or just wait for 10 seconds to boot
automatically from hard disk.).
Boot from CD:
ISOLINUX 2.00 2002-10-25 Copyright (C) 1994-2002 H. Peter Anvin
0) Boot from first hard drive
1) Boot to TYAN diskette maker
boot: 1_
2. Choose the chipset vender which you need from the main menu.
TYAN Driver Diskette Maker V1.0
** Main Menu**
====Choose Chipset Vendor====
01 Adaptec
02 Intel
03 LSI
04 nVidia
05 Promise
06 Silicon Image
07 VIA
EXIT