TYAN S8030 - Page 120

http://www.tyan.com
120
3.7.1 Secure Boot
Secure Boot
Secure Boot feature is Active if Secure Boot is Enabled. Platform Key (PK) is
enrolled and the System is in User mode. The mode change requires platform reset.
Enabled / Disabled
Secure Boot Mode
Secure Boot mode selector: Standard/Custom. In Custom mode Secure Boot
Variables can be configured without authentication.
Standard / Custom
Restore Factory Keys
Force System to User Mode. Install factory default Secure Boot key databases.
Press ‘Yes’ to proceed ‘No’ to cancel.
Reset to Setup Mode
Delete all Secure Boot key database from NVRAM. Deleting all variables will reset
the System to Setup Mode. Press ‘Yes’ to proceed ‘No’ to cancel.
Key Management
Enables expert users to modify Secure Boot Policy variables without full
authentication.