To Next Page
R
Robert WallAug 18, 2025
How to fix Tyco P5400 when there is no audio?
- WWarren FosterAug 18, 2025
If you cannot hear any audio from your Tyco Portable Radio, the speaker volume might be muted. Try increasing the volume level.
How to fix Tyco P5400 when there is no audio?
If you cannot hear any audio from your Tyco Portable Radio, the speaker volume might be muted. Try increasing the volume level.
What to do if my Tyco P5400 will not turn on?
If your Tyco Portable Radio does not turn on, it might be due to a low battery charge. Try changing the battery pack to a fully charged one.
What to do if my Tyco P5400 displays BAD PWD?
If your Tyco Portable Radio screen displays 'BAD PWD', it means an invalid password has been entered. Verify the password and re-enter it.
Why does my Tyco Portable Radio have poor audio quality?
Poor audio quality on your Tyco Portable Radio may be due to being in a poor coverage area or not on the network. Try moving to a better coverage area. Alternatively, if a data cable is connected, enter “atspkr1” to enable the internal speaker.
What to do if my Tyco Portable Radio displays OVR TEMP?
If your Tyco Portable Radio screen displays 'OVR TEMP', the radio may be too hot and will cease transmitting if an operational temperature threshold has been exceeded. Let the radio cool before attempting to transmit and report this failure to an authorized technician.
What to do if my Tyco Portable Radio will not transmit?
If your Tyco Portable Radio will not transmit, it may be out of coverage area or may be overheated. Return to coverage area if possible. If overheated, let radio cool before retrying transmission and report this failure to an authorized technician.
Why does my Tyco P5400 Portable Radio power off for no reason?
If your Tyco Portable Radio powers off for no apparent reason, it may be experiencing very low voltage. Have the battery checked by an authorized technician.
What to do if my Tyco P5400 will not register?
If your Tyco Portable Radio will not register or does not receive provisioning data, it might be due to bad logon credentials. Verify your logon and password.
What to do if Tyco P5400 displays NOAUTHV?
If your Tyco Portable Radio screen displays 'NOAUTHV', the radio authentication of the VNIC failed. Contact your system administrator.
What to do if Tyco Portable Radio displays NOAUTHM?
If your Tyco Portable Radio screen displays 'NOAUTHM', it means the VNIC authentication of the radio failed. Contact your system administrator.
Guidelines for ensuring RF electromagnetic energy exposure stays within FCC limits for occupational use.
Covers antenna care, electronic device interference, aircraft, blasting caps, and explosive atmospheres.
Describes the location and primary functions of buttons, knobs, and switches on the radio.
Explanation of various icons displayed to indicate radio operating modes and conditions.
Step-by-step guide to initiating an emergency transmission using the emergency button.
Steps to initiate an emergency call.
Describes the radio's controls (knobs, buttons, keypad) for conventional mode use.
Explanation of status icons specific to P25 operation.
Steps to initiate an emergency call in P25 mode.
General| Brand | Tyco |
|---|---|
| Model | P5400 series |
| Category | Portable Radio |
| Language | English |