TYCROP SMOOTHFLOW - Closing Tarp

18
4. Lift platform hatch and secure it (Figure 08 - 4). The hatch
is secure when the magnet makes contact with the metal
plate on the hatch (Figure 09 - 4). Climb down from the
platform using the ladder.
Figure 08 - 4
Figure 09 - 4
Closing Tarp
Using Tarp Pull Rope (if equipped)
1. Toss the tarp pull rope (Figure 10 - 4) over the top to
the opposite side of trailer. Pull the rope until the tarp
is fully unrolled.
Figure 10 - 4
CAUTION
Ensure that the opposite side of the trailer is clear of
personnel before tossing the tarp pull rope over.
2. Secure tarp with provided securements. (Refer to
Tarp Hook and Securements on page 19)
Using Tarp Crank Handle
1. Climb front ladder (Figure 11 - 4). (Refer to Front
Ladder and Platform on page 15)
Figure 11 - 4
2. From the platform, unroll the tarp using the crank
handle, which is located in the holder on the front
wall beside the ladder (Figure 12 - 4). Insert the
square end of the crank handle into the tarp tube
(Figure 13 - 4). Unroll the tarp until it is fully unrolled
(Figure 14 - 4). Stow crank handle in the holder
(Figure 15 - 4).
Figure 12 - 4
Option: Manual Roll Tarp - 4