EasyManua.ls Logo

TYCROP SMOOTHFLOW - Option: Moving Floor by Keith; Floor Operation Decals

TYCROP SMOOTHFLOW
56 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Operator’s Manual | Moving Floor Trailer 27
Option: Moving
Floor by Keith
®
General Safety
CAUTION
Read the Keith
®
moving floor Operator’s Manual and fully
understand all safety hazards around the floor prior to
operation.
The Keith
®
moving floor Operator’s Manual can be found
on the TYCROP Trailers website.
The floor will start to move when the drive system is
switched on.
Check that the PTO on the truck is compatible with your
moving floor. (Refer to Keith
®
wet kit diagram on page 27)
Never operate floor with doors closed.
Never stand where the load discharges.
Never adjust the unloading mechanism with the floor
operating.
Never go under the trailer during operations.
Never leave trailer unattended while in operation.
Never operate the moving floor when safety covers are
removed.
Never operate the moving floor while personnel are inside
the trailer.
Always keep hands, body parts and loose clothing away
from drive unit during operation.
Always disconnect the power take off (PTO) before
commencing any maintenance procedure.
Always disconnect power supply before going under the
trailer.
Always keep clear of any oil leaks when the hydraulic
pressure is high.
Always disconnect the power take off (PTO) before
moving trailer.
Floor Operation Decals
Option: Moving Floor by Keith
®
- 7