15
Unusual voltages/numbers of phases
Contact Tylö Customer Service before connecting to voltages or
numbers of phases that are not listed in the wiring diagram Figure
17.
Figure 15: Installing the sensor
Figure 16: Wiring through the wall.
Min. Ø13mm
16mm
20mm
12mm
External ON/OFF switch (option)
External ON/OFF switch can be installed anywhere outside the
sauna. The switch works for impulse or constant deactivation.
The heater circuit automatically recognises which is used. Heater
status and faults on the door contact can be seen if the switch has
a built-in LED.
See instructions supplied with the external switch.
Door contact
The door contact is necessary to be able to use the Pure panel’s
preselected time or the Elite panel’s calendar function, plus remo-
te control the sauna via external switch, mobile or PC apps.
See instructions supplied with the door contact.
To Next Page
Loading...
