TYM T233 HST User Manual

SECTION 1. SPECIFICATIONS 2
Item Specification
Displacement Pump 0~25㎤/rev.
Motor 25 ㎤/rev.
Charge pump 3.7 cc/rev
Swash plate angle(Pump) 0±16..3°(deg)
Swash plate angle (Motor) 16.3°(Deg)
Direction of Rotation(View from input shaft end) C.W
Charge relief setting Pressure( at 2700 rpm ) 9~10 Kgf/㎠
Casing Pressure Within 1.0 Kgf/㎠
Charge suction back pressure Within 0.2 Kgf/㎠
Filteration 10㎛
Strainer 150 mesh
Contamination Grade Within NAS 9
Max.Input Horse power 27 ps @ 2700 rpm
Rated speed 0~2700 rpm(Max. speed:3200 rpm)
Pressure Relief Valve setting Pressure 310 ±5 Kgf/㎠ at 2ℓ/ min
Cracking Pressure 290 ±5 Kgf/㎠ over at 2ℓ/ min
Working oil THF500
4-2
Case Drain Temperature +10°C~+90 °C(-20 °C~100 °C/ within 5minutes)
Max.Vibration
Within 9 G (88.26㎨ )
Efficiency Pressure(Kgf/㎠) 80 150 230 At N=2700rpm
Ө =16.3deg
(Representative 50℃)
Volumetric Efficiency(%) 96 94 90
Overall Efficiency(%) 57 70 71
Neutral Range(Sum of both direction )
(Note1. When it starts)
Min 1~Max. 2
deg(Min.0.017 rad)
(Max.0.035 rad)
At N=2700rpm
∆P=60 Kgf/㎠
(at delivery time : 50℃)
Ratio of output speed over input speed 1 ± 0.03 ∆P=0 Kgf/㎠
(Ө=Max deg(50℃)
Control force -0.8~+2.6 Kgf.m
(-7.84~25.5 N.m)
At N=2700 rpm
∆P=Min~200Kgf/㎠
Trunnion shaft moment -1.2~+2.8 Kgf.m
(-11.76~27.4 N.m)
At N=2700 rpm
∆P=Min~200Kgf/㎠

TYM T233 HST Specifications

General

Brand	TYM
Model	T233 HST
Category	Tractor
Language	English