TYPHOON BLUETOOTH™ 56K WIRELESS MODEM KIT
Article Number: #20006
Version 2.0 All specifications and information are subject to changes without further notices
21
xi. Modem RS232 interface installation procedures
1. Getting Started
a. At the rear of the modem, push the switch to "RS-232" position
.
b. Connect the telephone line to the RJ-11 socket and the other end to the telephone wall socket.
c. Plug in the RS-232 cable male connector to RS-232 connector of Bluetooth™ Modem, and plug in the female
connector to your computer’s serial port.
d. Plug in the AC adapter to the power outlet and the other end to the modem.
2. Driver Installation under Windows
For Windows® 98 SE
a. Start the computer and launched Windows 98 SE
operating system. Windows will recognize the new
device and activate the "Add New Hardware
Wizard" installation process. Insert the driver CD
and click the "Next" button to start.
b. Next, select the "Search for the best driver for
your device (Recommended)" option, and click
the "Next" button.
c. Select the "Specify a location" and type
"x:\Modem" (where x:\ is the path of your CD-
ROM drive) in the location or alternatively you can
click the "Browse" button to locate the file in the
CD drive and click the "Next" button.
To Next Page
Loading...