U-Line Echelon 2075DWRRSS - Initial Start-Up and Temperature Control; Initial Unit Operation Recommendation; Initial Start-Up Procedure

23
INITIAL START-UP AND ADJUSTING
THE TEMPERATURE CONTROL
U-Line recommends the unit be allowed to run overnight and make
ice prior to loading the refrigerator and/or freezer with product.
It is possible that dirt or scale will dislodge in the water line. Always
throw away all ice cubes made during the first two to three hours
of operation.
Once the installation is complete, the unit is ready for initial start-up and
operation.
1. Plug the appliance cord into a 115V polarized, grounded electrical
outlet.
The unit is turned ON with the ON/OFF switch in the front grille (Figure
20). (All units are shipped in the ON position.)
2. Wipe out inside of unit, again, with a clean, water-dampened cloth.
Figure 20
DWR011
OFF
ON
ON/OFF SWITCH