Ubee Interactive Understanding Default Values and Logins
Ubee EVW32C Advanced Wireless Voice Gateway Subscriber User Manual • March 2017 10
Serial console (optional)
Syslog
WiFi radar
Configuration backup and restore
Spectrum analyzer
TR-069 capable
Physical and Environmental
Dimensions when positioned vertically: 182mm (D) x 237mm (H) x 80mm (W,
including product stand)
Weight: 800g
Power: 12V / 2.5A
Operating Temperature: 0°C ~ 40°C
Storage Temperature: -10°C ~ 70°C
Operating Humidity: 10~90% (non-condensing)
1.5 Understanding Default Values and Logins
The EVW32C is pre-configured with the default parameters for the Service Provider.
Some regions may change default values using the cable modem or XML configuration
file. Check with your provisioning team to determine the default values for your region.
Local Port Address: 192.168.100.1
Web Interface: http://192.168.100.1
Operation Mode: NAT Mode
Subnet Mask: 255.255.255.0
Wireless Defaults:
Primary SSID (WiFi network name) = The last 6 characters of the cable modem
MAC address. The SSIDs are the same for the 2.4GHz and 5GHz radio bands.
The SSIDs are printed on the device label.
Example for a device with cable modem MAC address 68:14:01:24:A5:98 =
24A598
If the subscriber changes the SSID, the device does not revert to this default
SSID when the device is reset, except when a manual factory reset is
performed through the Web UI.
The SSID can also be found on the WLAN Basic screen. Refer to Using the
Basic Option on page 37.
Encryption Method = Auto
WPA Pre-shared Key = A unique key for each device, also called the network key,
the wireless key, or the wireless password. The pre-shared key for the EVW32C is
the 14 characters of the device serial number.
Example Pre-Shared Key: EVW32C00000060
To Next Page
Loading...
Need help?
General
