Ubee EVW32C User Manual

Ubee Interactive Using the VPN Option
Ubee EVW32C Advanced Wireless Voice Gateway Subscriber User Manual • March 2017 73
Address group
type
Configures the local network that will be protected by the IPsec VPN located on your device’s
LAN side. Choose the local address type:
 IP Subnet, to protect the whole subnet (default setting).
 Single IP address, to protect a single PC.
 IP address range, to protect several PCs.
Subnet Defines the subnet.
Mask Defines the subnet mask.
Identity type
Defines the identity type for this device:
 Automatically use WAN IP address
 IP address (default setting)
 Fully qualified domain name (FQDN)
 Email address (USER FQDN)
In Main mode (see IKE negotiation mode on page 75), the identity type and content are
encrypted to provide identity protection. The VPN concentrator can distinguish up to 30 different
incoming SAs that have dynamic WAN IP addresses and connect from remote IPsec routers.
You can select between five encryption algorithms (DES, 3DES, AES-128, AES-192 and AES-
256), two authentication algorithms (MD5 and SHA1) and three key groups (DH1 and DH2,
DH5) when you configure a VPN rule. The identity type and content act as an extra level of
identification for incoming SAs.
In Aggressive mode (see IKE negotiation mode on page 75), the VPN concentrator identifies
incoming SAs by identity type and content (which are not encrypted) to distinguish between
multiple rules for SAs that connect from remote IPsec routers that have dynamic WAN IP
addresses.
Identity Defines the value corresponding to the selected Identity type.
Remote endpoint settings
Address group
type
Defines the address group type:
 IP Subnet – protects the entire subnet.
 Single IP address – protects a single PC.
 IP address range – protects several PCs.
Subnet Defines the subnet.
Mask Defines the subnet mask.
Identity type
Defines the identity type to identity this device by:
 Automatically use WAN IP address
 IP address
 Fully qualified domain name (FQDN)
 Email address (USER FQDN)
Identity Defines the value corresponding to the selected identity type.
Network address
type
Defines the network address type:
 IP address, usually suitable for static public IP address (default setting).
 Fully Qualified Domain Name (FQDN), usually suitable for dynamic public IP address.
Label Description

Ubee EVW32C Specifications

General

Model	EVW32C
Category	Gateway
Frequency Band	2.4GHz and 5GHz
Ethernet Ports	4
USB Ports	1
Voice Ports	2
DOCSIS	3.0
Wireless Standard	802.11n
Security Features	WPA, WPA2
Type	Cable Gateway