EasyManua.ls Logo

Ubermann DG5500SE - Safety Instructions for Inspection and Maintenance; Warranty and Technical Service

Ubermann DG5500SE
Print Icon
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Check and refill fuel.
Check and fill lubricating oil.
Check oil leaks.
Check and tighten each engine part.
Change lubricant oil. 1
st
time 2
nd
and 3
rd
time
Clean oil filter. Clean Replace
Replace the air filter element. Replace
Clean the fuel filter. Clean Replace
Check the fuel injection nozzle.
Check fuel tube.
Adjust the valve set for the intake
and exhaust valves
Battery
Tighten head
screws.
Replace it i
necessary.
1
st
time
CHECK BEFORE USE, REPLACE IT IF NECESSARY
SAFETY INSTRUCTIONS FOR INSPECTION AND MAINTENANCE
Only regular maintenance and well-maintained equipment can be a satisfactory means. The lack of maintenance and
care can lead to accidents and unpredictable injuries.
The table above indicates how and when to check the equipment. The UBERMANN brand indicates that special tools and
skills are required.
Check with our dealers for assistance.
NOTE 1: Change the engine oil: remove the oil filler cap and the drain plug. Drain the used oil while the engine is still hot.
NOTE 2: change the air filter element: do not wash the air cleaner element with detergent. Never start the engine
without the element, or with a defective element.
NOTE 3: Clean and replace the fuel filter: (1) drain the fuel from the fuel tank; (2) loosen the small screws on the fuel
cock and remove the filter from the fuel tank. Wash the filter well with diesel.
ITEM / FREQUENCY
WARRANTY AND TECHNICAL SERVICE
Thank you for choosing this product
UBERMANN TOOLS: 2 YEARS WARRANTY
• Our equipment has been precisely tested and is covered by a manufacturing guarantee in accordance with current regulations.
• This warranty is effective from the date of purchase.
PLEASE KEEP PROOF OF PURCHASE.
• If the product fails within the warranty period, contact your authorized service center.
• Include your proof of purchase, details of the failure, your name and address, along with date and place of purchase. The
manufacturer will not reimburse. All products must be properly clean, safely and carefully packed to prevent damage or injury
during transport. The manufacturer may reject inappropriate or unsafe shipping.
• You must submit proof of purchase before carrying out any repair or maintenance work.
• All service must be performed only by authorized service center.
• Any parts to be replaced within the warranty period shall be property of the authorized service and will not be returned to the
user.
• Repairing or replacement of the product will not extend the warranty period.
• Repair or replacement of your product under the warranty provides you additional benefits and does not affect your consumer
rights set by law.
WHAT THIS WARRANTY COVERS:
Repairs covered by the warranty must meet the following conditions:
• That defects are attributable to faults or defects in materials or manufacture. If any part is no longer available or is
discontinued, the manufacturer will replace it with an alternative and functional part.
• That the instructions in this manual have been fully observed.
• That the repair has not been carried out or attempted by persons outside the authorized technical service.
• That only original accessories have been used.
• The product cannot have been exposed to improper use such as bumps, dents, etc., or damaging environments.
• That only water without impurities has been used.
WHAT THIS WARRANTY DOES NOT COVER:
The manufacturer does not guarantee repairs required as a result of:
• Wear of parts and/or components due to normal operation of the equipment.
• Accidental damages caused by transportation, negligent use and improper operation, resulting from improper use or
installation, which do not comply with the warnings in the operator´s manual.
• Change or modifications to the product in any way.
• The use of parts and accessories other than those that the original manufacturer provides.
• The warranty does not cover the possible cleaning of the functional components.
• Repairs or modifications performed by an unauthorized person or technical service.
This equipment is designed for PROFESSIONAL / INDUSTRIAL use and not for normal household activities. Therefore, the warranty
will NOT COVER uses different from the specified use. The manufacturer declines all liability for possible damage to persons or
material objects caused by improper installation or by improper use of the equipment.
In case of any damage or complain, contact the Sodimac store where you purchased the product along with proof of purchase.
Our after-sales service department will gladly assist you.
DAILY
INSPECTION
FIRST MONTH OR EVERY
20 HOURS
EVERY 3 MONTHS
OR 100 HOURS
EVERY 6 MONTHS
OR 300 HOURS
EVERY 1 YEAR
OR 1000 HOURS
69 70