SARA-G450 - System integration manual 
UBX-18046432 - R08  Design-in  Page 68 of 143 
C1-Public     
Using a battery pack with an internal NTC resistor, the MP2617H can monitor the battery temperature 
to protect the battery from operating under unsafe thermal conditions. 
Several parameters, such as the charging current, the charging timings, the input current limit, the 
input  voltage  limit,  and  the  system  output  voltage,  can  be  easily  set  according  to  the  specific 
application  requirements,  as  the  actual  electrical  characteristics  of  the  battery  and  the  external 
supply  /  charging  source:  suitable  resistors  or  capacitors  must  be  accordingly  connected  to  the 
related pins of the IC. 
 
C9 C12
GND
C11C10 C13
SARA-G450
52
VCC
53
VCC
51
VCC
+
Primary 
source
R3
U1
EN
ILIM
ISET
TMR
AGND
VIN
C2C1
12V
NTC
PGND
SW
SYS
BAT
C4
R1
R2
D1
θ
Li-Ion/Li-Pol 
battery pack
B1
C5
Li-Ion/Li-Polymer battery  
charger / regulator with 
power path managment
VCC
C3 C6
L1
BST
D2
VLIM
R4
R5
C7 C8
Ferrite bead 
or 0Ω
R6
SYSFB
R7
D3
 
Figure 31: Li-Ion (or Li-Polymer) battery charging and power path management application circuit 
 
Part number - Manufacturer 
Li-Ion (or Li-Polymer) battery pack with 10 k NTC 
22 µF capacitor ceramic X5R 1210 10% 25 V 
GRM32ER61E226KE15 - Murata 
100 nF capacitor ceramic X7R 0402 10% 16 V 
GRM155R61A104KA01 - Murata 
1 µF capacitor ceramic X7R 0603 10% 25 V 
GRM188R71E105KA12 - Murata 
56 pF capacitor ceramic C0G 0402 5% 25 V 
GRM1555C1E560JA01 - Murata 
15 pF capacitor ceramic C0G 0402 5% 25 V 
GRM1555C1E150JA01 - Murata 
330 µF capacitor tantalum D_SIZE 6.3 V 45 m 
T520D337M006ATE045 - KEMET 
10 nF capacitor ceramic X7R 0402 10% 16 V 
GRM155R71C103KA01 - Murata 
Low capacitance ESD protection 
MBRA340T3G – ON Semiconductor 
10 k resistor 0402 5% 1/16 W 
1.0 k resistor 0402 5% 0.1 W 
22 k resistor 0402 5% 1/16 W 
26.5 k resistor 0402 1% 1/16 W 
1.2 µH inductor 6 A 21 m 20% 
Li-Ion/Li-Polymer battery DC-DC charger / regulator 
with integrated power path management function 
MP2617H - Monolithic Power Systems (MPS) 
Table 20: Suggested components for Li-Ion (or Li-Polymer) battery charging and power path management application circuit