Connectors are the skeleton of the robot. Slots or rudders of connectors can be spliced together
with other components' rudders or slots.
Example:
Connecting Servo with C3
4.Connectors
Decorating pieces can also be integrated with other components through plugs and attachments.
The decorating pieces are the cover of the model and give it a more attractive appearance.
5.Decorating Pieces
Straighten the rudder and
align the component.
Push the right side of the
component as indicated by
the arrow, until you hear a
popping noise.
Adjust the other side. When
you hear the same popping
noise, the component has been
successfully installed.
Pop
Pop
Gently widen both sides
of the component.
5
To Next Page
Loading...
Need help?
General
