Ultimaker METHOD XL - PRINTING & CONTROL; PRINT COMPLETE

ULTIMAKER METHOD XL MANUAL PAGE 22
 START PRINT
Choose a .MAKERBOT le that has been exported from
CloudPrint to begin printing. Note that the le needs to be
formatted from within CloudPrint for UltiMaker Method XL
before being exported. Select [START] to begin printing the
le.
 PRINTING
During the printing process you will be able to view print
progress information and other printer details.
1. Percentage of the print completed.
2. Time elapsed and estimated time remaining in the print.
While the Heated Chamber and Performance Extruders are
heating, the screen will display the current and target
temperatures.
3. While actively printing, swipe the touch screen between
the following screens
Print progres
Rendering of your model or layou
File informatio
Print options informatio
Extruder temperatures
4. The Print menu contains the following options
PAUSE - Press the pause button on the screen to
temporarily pause your print
CANCEL - Select this option to cancel your print.
 PRINT COMPLETE
When your print nishes, wait for the exible build plate to
cool then remove from the UltiMaker Method XL. Remove
the print from the build plate by simply bending the exible
build plate. The print will peel o the smooth grip surface.
If you wish to print the object again, make sure to clear the
build plate.