Go to CLOUDPRINT.MAKERBOT.COM and log in.
If you don’t already have a UltiMaker account, click “Sign Up” to create one
USING CLOUDPRINT
Please visit support.ultimaker.com to get our most up-to-date instructions and guides on how to use the CloudPrint
application.
ADD YOUR PRINTER
To add printers to your account on CloudPrint, rst click “Add Printer”. Choose the UltiMaker printer type that you’d like to
add to CloudPrint and your workspace and follow the instructions on the screen.
You will see an input box to enter a 6-digit code.
To get your code, go to your printer and navigate to Settings > System Settings > Account Authorization > Authorize
With Code.
A 6-digit code will show up on your Method XL’s screen, type this code into the input eld on your device.
Refresh the web page and click “Manage Printers” to see your printer.
Click “Share with Workspace” on each printer to give all members of your workspace access to your printer.
STARTING A PRINT
To start a print, click on Print Preparation at the top of the browser window
You’ll be directed to a new screen where you can upload your model. You can upload using the “Upload” button, or by
dragging the le on to the. build plate
Choose the print mode and settings needed to print your model. You can also Move, Rotate, and Scale your models(s)
as well as use our new Smart Orient or Smart Arrange options from the bottom menu.
When you’re nished preparing, click “Print Preview” to see a preview of the slice. Then select “Queue” to queue it on
the machine or select the three dots to export a le
If the printer is available and you have the print Queued, you can click the start next print button on the printer card
under Workspace Management > Workspace Printers.
PAUSE OR CANCEL A PRINT
To PAUS
E
a print, push the pause icon on the print progress screen. You can also select the printer in CloudPrint and
select PAUS
E
.
To CA
N
C
E
L a print, tap the top of the screen that says printing or paused. A drop down will appear with the option to
cancel the print.
A
F
TER YOUR PRINT
RE
M
O
V
ING T
H
E PRINT
F
RO
M
T
H
E
B
UILD PLATE
When your print nishes, wait for the
exible build plate to cool then remove from the UltiMaker Method XL. Remove the print from
the build plate by simply bending the
exible build plate. The print will peel o
the smooth grip surface.
NOTE
:
When you bend the
exible build plate, some pieces of the raft may remain on the plate. Simply bend the
ex build plate
again or use a
at, non-sharp tool such as a putty knife to remove the raft pieces.
N
ever use a knife to remove pieces of the raft
—
doing so can damage the build plate.
ULTIMAKER MET
H
OD
X
L MANUAL PA
G
E
25
To Next Page
Loading...
