Ultra Power B6 mini User Manual

LITHIUM BATTERY(LiPo/LiFe/LiIon/LiHV)PROGRAM
This screen shows the real-time status
charging. Press BATT TYPE/STOP button
once to stop the charge process.
The value of discharge current on the left
can not exceed 1C, and the value on the
right can not be under the voltage
recommended by the manufacturer to avoid
over discharging. press the START/ENTER
button for more than 3 seconds to start
discharging.
This screen displays the number of cells you
set up and the processor detects.
R=Number of cells detected by charger.
S=Number of cells set by you at the previous
screen.
If both numbers are identical you can start
charging process. If not, press BATT TYPE
/STOP button to go back to previous screen to
recheck the number of cells of the battery pack
before going ahead.
This screen shows the real-time status of
discharging, you can press BATT TYPE/STOP
button to stop discharging.
DISCHARGING LITHIUM BATTERY
Start
Enter
Start
Enter
Start
Enter
Batt type
Stop
>3 seconds
DEC. INC. DEC. INC.
Number
of
cells
Elapsed
time
Charge
or discharge
current
Supplied
capacity
Current
voltage
battery
Number
of
cells
-
Elapsed
time
+
Battery
voltage
Discharged
capacity
Discharge
current
-
+
17

Ultra Power B6 mini Specifications

General

Brand	Ultra Power
Model	B6 mini
Category	Battery Charger
Language	English