Incorrect polarity connected.
The battery is interrupted.
The Battery connection is wrong.
The balance connect is wrong.
Input voltage less than 11V.
Input voltage higher than 18V.
Voltage of one cell in the battery pack is too low.
Voltage of one cell in the battery pack is too high.
Voltage of one cell in the battery pack is invalid.
The cell number is wrong.
The internal temperature of the unit goes too high.
The external temperature of the unit goes too high.
The battery capacity is more than the maximum
capacity which the user sets.
The charging time is longer than the maximum
charging time which the user sets.
The battery voltage is higher than the maximum
voltage which the user sets when charging in
balance mode.
CONNECT ERROR
CHECK MAIN PORT
CELL NUMBER
INCORRECT
CELL ERROR
HIGH VOLTAGE
CELL ERROR
LOW VOLTAGE
INT.TEMP.TOO HI
DC IN TOO LOW
DC IN TOO HIGH
BATTERY WAS FULL
CELL ERROR
VOLTAGE-INVALID
EXT.TEMP.TOO HI
OVER CHARGE
CAPACITY LIMIT
OVER TIME LIMIT
BALANCE CONNECT
ERROR
WARNING AND ERROR MESSAGE
It incorporates a variety of functions for the systems to verify processes
and the state of the electronics. In case of an error the screen will
display the cause of error and emit an audible sound.
29
To Next Page
Loading...
Need help?
General
