Voltage and time at waveform point
Allows cursor display during automatic measurement
Voltage difference between cursors (△V)
Time difference between cursors (△T)
The reciprocal of △T (Hz) (1/△T)
Manual
Tracking Mode
Indicator
Maximum, minimum, peak-to-peak, median, top, bottom, amplitude,
period average, average, periodic RMS, RMS, overshoot, preshoot,
frequency, period, rise time, fall time, positive pulse width, negative
pulse width, rise delay, fall delay, FRR, FRF, FFR, FFF, LRF, LRR,
LFR, LFF, positive duty ratio, negative duty ratio, phase, area, cycle area.
Displays 5 measurements at the same time
Screen or cursor
Average, maximum, minimum, standard deviation and the
number of measurements
6-bit hardware frequency meter
Measure
Cursor
Automatic Measurement
Number of Measurement
Measurement Range
Measurement Statistics
Frequency Meter
A+B, A-B, A×B, A/B, FFT, logic operation, digital filtering, advanced operation
Rectangle, Hanning, Blackman, Hamming
Split screen; time base can be adjusted independently
Vrms, dBVrms
Low-pass, high-pass, band-pass and band-stop
AND, OR, NOT, XOR
Log, Exp, Sin, Cos, Tan, Sqrt, Inth, Diff
Mathematical Operations
Waveform Calculation
FFT Window Type
FFT Display
FFT Vertical Scale
Digital Filter
Logic Operation
Advanced Operation
Internal (256), external USB storage device
Internal (256), external USB storage device
External USB storage device, it can also store the
relevant parameter information.
Storage
Setting
Waveform
Bitmap
63
To Next Page
Loading...
Need help?
General
