User’s Manual UTG1000X Series
Instruments.uni-trend.com 6 / 74
sockets more than 10 meters away from CAT III circuit or sockets more than 20
meters away from CAT IV circuit.
Primary circuit of large equipment directly connected to the distribution board
and circuit between the distribution board and the socket (three-phase
distributor circuit includes a single commercial lighting circuit). Fixed equipment,
such as multi-phase motor and multi-phase fuse box; lighting equipment and
lines inside large buildings; machine tools and power distribution boards at
industrial sites (workshops).
Three-phase public power unit and outdoor power supply line equipment.
Equipment designed to “initial connection”, such as power distribution system of
power station, power instrument, front-end overload protection, and any outdoor
transmission line.
CE indicates a registered trademark of EU.
UKCA indicates a registered trademark of UK.
ETL indicates a registered trademark of Intertek. It conform to UL STD 61010-1
and 61010-2-030, CSA STD C22.2 No.61010-1 and 61010-2-030.
This product complies with the marking requirements of WEEE Directive
(2002/96/EC). This additional label indicates that this electrical / electronic
product must not be discarded in household waste.
This environment-friendly use period (EFUP) mark indicates that dangerous or
toxic substances will not leak or cause damage within this indicated time period.
The environment-friendly use period of this product is 40 years, during which it
can be used safely. Upon expiration of this period, it should enter the recycling
system.
Safety Requirements
Please connect this device to AC power supply with the power cable provided;
The AC input voltage of the line reaches the rated value of this device. See the
product manual for specific rated value.
The line voltage switch of this device matches the line voltage;
The line voltage of the line fuse of this device is correct;
It not used for measuring the main circuit.
To Next Page
Loading...
