UNI-T UTG1000X Series User Manual

User’s Manual UTG1000X Series
Instruments.uni-trend.com 20 / 74
3.2.4 System
Function Menu
Function Sub-menu
Setting
Description
Start Phase
Sync, Independent
Language
English, Chinese
simplified, Deutsch
Beep
OFF/ON
Digital Separator
Comma, Space, none
Backlight
10%, 30%, 50%, 70%,
90%, 100%
Screen Saver
OFF, 1 minute, 5
minutes, 15 minutes, 30
minutes, 1 hour
Default Setting
Restore to the factory setting
Help
Help description
About
The information of model’s
name, version and company’s
website
Upgrade
Connecting to the upper
computer to upgrade.
Select UtilitySystem key to enter System setting.
Remarks: Due to the system selection menu System, there are two pages, you need to press Next key to turn
page.
1. Start Phase
Select PhaseSync to “Independent” or “Sync”.
Independent: The output phase of CH1 and CH2 output phase is not associated;
Sync: The output start phase of CH1 and CH2 is synchronized.
2. Language
Press Language to set the system language.
3. Beep
Set whether has beeper alarm when press the key, press Beep to select ON or OFF.
4. Digital Separator
Set the separator for the numerical value between in parameters of channel, press NumFormat to select
comma, space or none.
5. Backlight
Set the brightness for the backlight of screen, press BackLight to select 10%, 30%, 50%, 70%, 90% or 100%.
6. Screen Saver
Press ScrnSvr to select OFF, 1 minute, 5 minutes, 15 minutes, 30 minutes or 1 hour. When there is no arbitrary

UNI-T UTG1000X Series Specifications

General

Brand	UNI-T
Model	UTG1000X Series
Category	Portable Generator
Language	English