User’s Manual UTG1000X Series
Instruments.uni-trend.com 8 / 74
Do not operate in humid
environment
Do not use this device in a humid environment to avoid the risk of internal short
circuit or electric shock.
Do not operate in
flammable and explosive
environment
Do not use this device in a flammable and explosive environment to avoid product
damage or personal injury.
If this device may be faulty, please contact the authorized maintenance personnel
of UNI-T for testing. Any maintenance, adjustment or parts replacement must be
done by the relevant personnel of UNI-T.
Do not block the ventilation holes at the side and back of this device;
Do not allow any external objects to enter this device via ventilation holes;
Please ensure adequate ventilation, and leave a gap of at least 15 cm on both sides,
front and back of this device.
Please transport this device safely to prevent it from sliding, which may damage
the buttons, knobs or interfaces on the instrument panel.
Poor ventilation will cause the device temperature to rise, thus causing damage to
this device. Please keep proper ventilation during use, and regularly check the
vents and fans.
Please take actions to avoid dust or moisture in the air affecting the performance
of this device. Please keep the product surface clean and dry.
The recommended calibration period is one year. Calibration should only be carried
out by qualified personnel.
To Next Page
Loading...
