Unic Tango Ace - Cleaning Cycles Procedures

32
►Cleaning Cycles
In the ‘Cleaning’ menu, the rinsing icons automatically start a rinse cycle (~30 sec) for the milk
or co󰀨ee systems.
Daily cleaning is required; the machine will stop after 26 hours if a tablet cleaning has not been completed.
As soon as the cleaning is nished, the timer restarts for another 26 hours.
Note: for more information about cleaning products, refer to the manufacturer’
s safety data sheet.
♦ Milk & co󰀨ee cleaning
It’s possible to lunch in same time these two cleanings, start by the co󰀨ee circuit by inserting the pellet follows
the cleaning procedure of the milk circuit.
♦ Co󰀨ee cleaning
Tap the “Co󰀨ee cleaning” icon to access the procedure and follow it step-by-step.
DON’T FORGET TO INSERT TABLET (1 tablet)
(UNIC reference, box of tablets: 92060)
Cleaning details:
2 minute > soak
6 minute > wash
3 minute > rinse
1
2
3
4
5 6
7