Using Call Waiting
Call Waiting, a service available from your telephone provider, lets you ♦
receive calls while you are on another call. Caller ID on Call Waiting
(CIDCW) service displays Caller ID information for a waiting call.
If you get a Call Waiting call, the phone sounds a tone and displays any
CID information received from the waiting call.
For Australian Model: Press Talk/Flash and then press 2 to accept the
waiting call. The first caller is put on hold, and you will hear the new caller
after a short pause. To return to the original caller, press Talk/Flash and
then 2 again.
For New Zealand Model: Press Talk/Flash to accept the waiting call. The
first caller is put on hold, and you will hear the new caller after a short
pause. To return to the original caller, press Talk/Flash again.
Using the Phonebook
The phone can store up to 100 entries in its phonebook. All handsets
share the same phonebook, so only one handset can access it at a time.
To... Press...
open/close the
phonebook
PhonEbook
.
scroll through the
entries
down
to scroll through the entries from A to Z.
uP
to scroll from Z to A.
jump to entries that
start with a certain
letter
the number key corresponding to the letter you
want.
dial the current entry
Talk/flaSh
or
SPEakEr
.
edit the current entry
MEnu/SElEcT
, then select
Edit
.
delete the current
entry
MEnu/SElEcT
, then select
Delete
. When the phone
prompts you to confirm, select
Yes
.