If a handset was ever registered to a base, you must reset it before it ♦
can register to a new base; see p. 21, or see the accessory handset
manual.
Conference Calling
When an outside call comes in, two handsets can join in a conference ♦
call with the outside caller.
To join a call that’s already in progress, just press ♦
Talk/flaSh
or
SPEakEr
.
To leave the conference call, hang up normally; the other handset ♦
remains connected to the call.
Call Transfer
To... Press...
transfer a call
inTErcoM/clEar
. The phone puts the call on hold and prompts
you to select the handset you want to page. When the other
handset accepts the call, you'll be disconnected (press
Talk/
flaSh
to rejoin the call).
cancel a
transfer
Talk/flaSh
to return to the call.
accept a
transferred
call
inTErcoM/clEar
to answer the page and speak to the other
handset. Then, press
Talk/flaSh
to speak to the caller.
Privacy Mode
To activate privacy mode on a call in progress, press
MEnu/SElEcT
twice.
As long as privacy mode is on, you'll see a in the display, and no other
handsets can join your call. Privacy mode turns off automatically when
you hang up; you can also turn it off by pressing
MEnu/SElEcT
twice.
Handset to Handset Intercom
Whenever the phone is in standby, you can make an intercom call ♦
between handsets without using the phone line.
You can make an intercom call from any handset, but only two ♦
handsets can be in an intercom call at any time.
If an outside call comes in during an intercom page, the phone cancels ♦
the page so you can answer the incoming call.
If an outside call comes in during an intercom call, press ♦
Talk/flaSh
to
hang up the intercom call and answer the outside call.
To Next Page
Loading...
