Uniden DECT 3035 - Entering Text on Your Phone

9
Date & Time Menu
Use this menu to set the clock (if you have Caller ID, the phone sets date
and time automatically). Enter the date and time (DD/MM/YY); select AM
or PM . Use
cid
to move the cursor past a digit without changing it.
Global Setup Menu
The settings on this menu affect all handsets. Only one handset at a time
can change these menu options.
Insert 0
This feature adds “0” or “00” at the beginning of the
number received from Caller ID. The default setting for
New Zealand is ON. The default setting for Australia is
OFF.
Set Line Mode
Do not change this setting unless instructed to by
customer service.
VMWI Reset Reset the Voice Message Waiting Indicator (see p. 15).
Entering Text on Your Phone
Use the 12-key dial pad anytime you want to enter text into your phone ♦
(a name in the phonebook, the handset banner, etc.).
If two letters in a row use the same key, enter the first letter; wait for the ♦
cursor to move to the next space and enter the second letter.
To... Press...
move the cursor left
PhonEbook
.
move the cursor right
cid
.
erase the character at the cursor
inTErcoM/clEar
.
erase the entire entry and hold
inTErcoM/clEar
.
enter a blank space
#
.
switch between upper and lower case
letters
*
.
rotate through the punctuation and
symbols
0
.
DECT3035 OM.indd 9 22/11/10 9:09:09 AM