EasyManuals Logo

Uniden TRU 8885 Series User Manual

Uniden TRU 8885 Series
96 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #15 background imageLoading...
Page #15 background image
GETTING STARTED [14]
www.uniden.com
Direct wall mounting
If you don't have a standard wall plate, you can mount your phone directly to the
wall. Before doing this, consider the following:
Avoid electrical cables, pipes, or other items behind the mounting location that could
cause a hazard when inserting screws into the wall.
Try to mount your phone within 5 feet of a working phone jack to avoid excessive lengths.
Make sure the wall material is capable of supporting the weight of the base and handset.
Use #10 screws (minimum length of 1 & 3/8 inches) with anchoring devices suitable for
the wall material where the base unit will be placed.
1) Insert two mounting screws into the wall (with their
appropriate anchoring device), 3 & 15/16 inches
apart. Allow about 1/8 of an inch between the wall
and screw heads for mounting the phone.
2) Refer to steps 1 through 7 on page 13 to mount the
telephone.
GETTING STARTED

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Uniden TRU 8885 Series and is the answer not in the manual?

Uniden TRU 8885 Series Specifications

General IconGeneral
BrandUniden
ModelTRU 8885 Series
CategoryCordless Telephone
LanguageEnglish

Related product manuals