Need help?Do you have a question about the Uniden X76 and is the answer not in the manual?
Lists the key features of the Uniden X76 UHF CB Transceiver.
Instructions on how to power the Uniden X76 transceiver on and off.
How to adjust the squelch level and enter monitor mode.
How to choose a radio channel on the Uniden X76.
Instructions for speaking into the microphone and sending transmissions.
Setting a specific channel for quick access.
Returning to the programmed instant channel.
Using the emergency button for channels 05 and 35.
How to use the call function to transmit a ringing tone.
Monitoring two channels simultaneously.
Explanation of how repeater channels extend radio range.
How to use repeater channels for transmission and reception.
How to automatically search for active channels.
Continuous scanning of all channels.
Scanning channels added to a specific group memory.
Monitoring the priority channel during scanning.
Managing channels for Open Scan and Group Scan.
Choosing one of five available call tones.
Preventing transmission on an occupied channel.
Enabling or disabling the beep after transmission.
Using CTCSS codes to filter received signals.
Using DCS codes for enhanced signal filtering.
Adjusting the display backlight color.
Adjusting the display brightness level.
Enabling or disabling audible feedback for key presses.
Choosing the audio output speaker (base, mic, or both).
To Next Page
General
