12
Package Content
a
b
e
c
d
a OpenScape Desk Phone CP700/700X
b Stand
c Handset
d Handset cable
e Installation and Quick Reference Guide
Notes about Place of Use
• Operation of a SIP telephone is only permitted with WLAN or with in-
door LAN cabling. The device shall be connected to the IP infrastructure
using a shielded LAN cable: Cat-5 for 100 Mb/s or Cat-6 for 1000 Mb/s.
The LAN cabling of the building shall ensure that the shield of this cable
is grounded.
• The telephone should be operated in a controlled environment with an
ambient temperature between 5 °C and 40 °C (41 °F and 104 °F).
• Do not install the telephone in a room where large quantities of dust ac-
cumulate; this can considerably reduce the service life of the telephone.
• Do not expose the telephone to direct sunlight or any other source of
heat, as this is liable to damage the electronic equipment and the plastic
casing.
• Do not operate the telephone in damp environments such as bathrooms.
Connect the Handset to the Telephone
See also overview on page 2.
1. Insert the plug on the long end of the handset cable d into the
jack on the base of the telephone and press the cable into
the groove provided.
2. Insert the plug on the short end of the handset cable d into the
jack on the handset c.
F
To Next Page
Loading...
Need help?
General