Unify OpenScape 4000 User Manual (English)

Other manuals for Unify OpenScape 4000

Administration Manual38 pages

User Guide Hfa219 pages

Quick Reference Guide2 pages

Quick Reference Card2 pages

Questions and Answers:

A
Alejandro RobersonAug 20, 2025
What to do if I get messages during Fernkonfiguration on Unify Telephone?
- M
  Mr. Christopher KennedyAug 20, 2025
  If you receive messages during Fernkonfiguration on your Unify Telephone, this may be due to several reasons: * The IP address of the Unify Vermittlungrechner cannot be retrieved (DNS query failed). * A connection cannot be established to the Unify Vermittlungrechner (No response, Rejected, Not authorized, No or invalid OCSP response, Certificate invalid). * The IP address of the deployment server cannot be retrieved (DNS query failed). * A connection cannot be established to the deployment server (No response, Rejected). In any of these cases, contact your administrator and specify the error code.
J
Jennifer Wolf MDAug 22, 2025
What to do if I cannot dial a number on my Unify IP Phone?
- A
  Aaron BennettAug 22, 2025
  If you cannot dial a number on your Unify IP Phone, it might be locked. Check if the message "Phone locked. To unlock enter the PIN." appears on the screen. If it's locked, enter your PIN to unlock it.
B
Bethany BowmanAug 25, 2025
Why is my Unify IP Phone not ringing?
- D
  Diana ShermanAug 25, 2025
  If your Unify IP Phone isn't ringing when you receive a call, the ringer might be deactivated. Look for the ringer icon in the status bar on the display. If it's deactivated, you'll need to activate the ringer.
J
Jeffery FloresAug 26, 2025
Why Unify IP Phone pressed key does not respond?
- T
  Tiffany AndersonAug 26, 2025
  If a pressed key on your Unify IP Phone does not respond, it might be because the phone is locked. Check if the message "Phone locked. To unlock enter the PIN." is displayed on the screen. If it is, enter your PIN to unlock the phone.
F
fmooneyAug 27, 2025
What to do if I cannot dial a number on Unify IP Phone?
- K
  Kerri CummingsAug 27, 2025
  If you cannot dial a number on your Unify IP Phone, the phone may be locked. Check if the message "Phone locked. To unlock enter the PIN." appears on the screen. If it does, enter your PIN to unlock it.
K
Kristin PriceAug 29, 2025
Why Unify IP Phone does not ring on call?
- J
  jocelyngarzaAug 29, 2025
  If your Unify IP Phone does not ring when you receive a call, the ringer might be deactivated. Check the status bar on the display for the ringer icon. If the ringer is deactivated, activate it.
M
Mark AndersonAug 31, 2025
What does deployment error AU mean on Unify IP Phone?
- M
  Monique ClarkAug 31, 2025
  If you encounter a deployment error AU on your Unify IP Phone, it means the process was canceled by the user. In such cases, please contact your administrator and specify the error code.
J
Jacqueline RobertsSep 2, 2025
What to do if fault persists for more than five minutes on Unify IP Phone?
- C
  Cameron RobinsonSep 2, 2025
  Contact your administrator first if a fault persists for more than five minutes, for example.
M
Mrs. Cynthia Rogers MDSep 3, 2025
What to do if the IP address of the Unify Vermittlungrechner cannot be retrieved?
- D
  Douglas HowardSep 3, 2025
  If the IP address of the Unify Vermittlungrechner cannot be retrieved for your Unify IP Phone, it may be due to a failed DNS query. Please contact your administrator and specify the error code.
T
Tyler TaylorSep 5, 2025
What to do if a connection cannot be established to the Unify Vermittlungrechner – No response?
- Q
  qharrisSep 5, 2025
  In such cases, please contact your administrator and specify the error code.