Unify OpenScape 4000 - Allowing Busy When Dialling

Other settings and functions 217
Allowing Busy when dialling
If you activate this function, an incoming call received while you are dialing is re-
jected. The caller then hears the busy signal.
z You can also configure this setting via the Web interface  page 238.
@ Press the key for the Main menu if appropriate.
Open using the Softkey.
Open using the Softkey.
if nec. j Enter and confirm the User password.
Open using the Softkey.
Open using the Softkey.
Enable or disable using the Softkey.
Save the setting with the Softkey.
Settings
_
$
User settings
-
_
$
Configuration
-
_
Outgoing calls
-
_
Busy when dialling
¢_
Q
_
This setup option can also be found in the "Incoming calls" > "Handling"
menu.