Unify OpenScape 4000 User Manual

200 Other settings and functions
Activating or deactivating immediate call forwarding
All calls are forwarded regardless of other settings. The prerequisite for forward-
ing is that a forwarding destination has been entered. If no destination has been
entered, you will be forwarded automatically to enter a destination when you at-
tempt to activate forwarding.
\ Press the key shown to open the Presence menu.
Activating forwarding for all calls to one destination
Activate with the Softkey.
All calls are forwarded.
\ Exit the menu.
Saving destination phone numbers for call forwarding
Entering a destination for Forward all calls
\ Open the Presence menu.
« Open the Forward to menu.
Use the Softkey to open the editor for the destination phone number.
If no destination or your desired destination has not been preset, enter the des-
tination number using the dialpad.
j Enter/change the destination phone number. Confirm your input with the Soft-
key.
or
Confirm a preset destination with the Softkey.
Forward all calls
-
¦_
Forward all calls
-
¢_
You can alternatively enter the call forwarding settings via the user menu
( page 101) or also using the Web interface page 238. If a number was
entered first, it can no longer be deleted via the local telephone settings
rather can only be overwritten.
Forward all calls
-
¦_
Destination
K
_
©
3335
Q
_
3338
Q
_

Unify OpenScape 4000 Specifications

General

Brand	Unify
Model	OpenScape 4000
Category	Telephone
Language	English