Unify OpenScape 4000 - Answering a Call Via the Headset

80 Making calls
Suggestions for using speakerphone mode:
• Adjust the call volume while speakerphone mode is active.
• The ideal distance between the user and the phone in speakerphone mode is
50 cm.
Answering a call via the headset
Prerequisite: A headset is connected.
Answering calls via the headset key
The phone rings. The caller is displayed. Only the LED on the ² key flashes.
² Press the key shown.
if nec. " Adjust the call volume  page 22.
Answering calls automatically via the headset
Press the Function key to activate automatic call answering. The key LED and
the headset key illuminate.
or
@ Press the key for the Main menu.
Open using the Softkey.
€ Select the function.
Press the Softkey to activate automatic call answering. The key LED and the
headset key illuminate.
A short acoustic signal is heard on the headset for a call and the connection is
established.
If you want to manually answer calls again, deactivate the automatic answering
function using the "Auto-Headset" key. Both keys are off.
Make sure your headset port is set up properly  page 176.
‹ Incoming call
Thomas Meier
1234954
ñ
The administrator has additionally configured a Function key with the "Au-
to-Headset" function (AICS Zip tone) ( page 136).
á Auto-Headset R
_
Favourites
_
Auto-Headset
¦
_