Unify OpenScape 4000 User Manual

112 Using Bluetooth
Synchronize Contacts with Bluetooth paired
mobile device
The Bluetooth function on your OpenScape CP700/700X allows the automatic
transfer of contacts from a paired mobile device to your OpenScape CP700/
700X whenever the two devices are connected.
Prerequisite: The Bluetooth function on your OpenScape CP700/700X is acti-
vated  page 125.
Perform the steps described below to find and pair the Bluetooth mobile device.
@ Press the key for the Main menu if appropriate.
Open using the Softkey.
Open using the Softkey.
if nec. j Enter and confirm the User password.
Open using the Softkey.
Open using the Softkey.
Start the search for new devices with the Softkey. Start or set the paging function
on the Bluetooth device if appropriate.
Located devices are displayed. Repeat the search if appropriate with the Soft-
key.
Select the mobile device and open with the Softkey.
Perform the necessary steps on the destination device to pair the device.
Confirm the pairing prompt with the Softkey. The Bluetooth device is paired and
added to the list.
or
A pairing PIN is requested.
j Enter the pairing PIN and confirm with the Softkey. The Bluetooth device is
paired and added to the list.
Settings
_
$
User settings
-
_
$
Bluetooth
-
_
Paired devices
-
_
Paired devices
Õ
_
Nearby devices
Õ
_
†
Smartphone
è
_
Accept
Q
_
©
Enter pairing PIN...
Q
_

Unify OpenScape 4000 Specifications

General

Brand	Unify
Model	OpenScape 4000
Category	Telephone
Language	English