Unify OpenScape 4000 User Manual

Making calls 83
Rejecting a call
You can reject an incoming call.
Prerequisite: An incoming call is displayed or signaled. The function is ap-
proved by the administrator.
Press the Softkey. The caller hears a busy signal.
Deflecting a call
Prerequisite: An incoming call is displayed or signaled. The function is ap-
proved by the administrator.
Press the Softkey. The conversations view is opened.
If a destination phone number is programmed, it will appear as the top entry in
the list  page 211. Press the Softkey to dial this number.
or If you did not save a phone number when programming call deflection, or if you
want to use a different destination, you are now prompted to enter a destination
phone number for call deflection.
j Enter the alternative phone number.
Confirm with the Softkey. The call is deflected.
Responding to a Callback
Prerequisite: A callback was requested, see  page 88. Your phone rings and
the subscriber information appears on the screen.
Accepting a Callback
Press the Softkey.
Rejecting a Callback
Press the Softkey.
The callback request is deleted. The caller's phone number is added to the
missed calls list.
Reject
P
_
The rejected caller is saved in the conversations list as a missed call. You
can then call this party back at a later time.
Deflect
D
_
123456789
Ô
_
©
Deflect to...
A
©
082631565
Ô
_
Accept
O
_
ñ
The Reject function is approved by the administrator.
Reject
O
_

Unify OpenScape 4000 Specifications

General

Brand	Unify
Model	OpenScape 4000
Category	Telephone
Language	English