Unify OpenScape 4000 User Manual

134 Using Bluetooth
Enter a new value if appropriate.
j Change to the desired value and conclude your input with the Softkey.
Save the modified input with the Softkey.
Activating/deactivating iBeacon beacons
z You can also configure this setting via the Web interface  page 238.
@ Press the key for the Main menu if appropriate.
Open using the Softkey.
Open using the Softkey.
if nec. j Enter and confirm the User password.
Open using the Softkey.
Activate with the Softkey. The Bluetooth function is activated and is now avail-
able.
Open using the Softkey.
Open using the Softkey.
Select using the Softkey.
Setting the UUID
€ Select input for UUID.
The current UUID digits are displayed. Open the UUID field with the Softkey.
An UUID 32 digit sequence may already be entered. This defines the UUID
broadcast in the iBeacon frame.
j Change to the desired UUID and conclude your input with the Softkey.
©
1200
Q
_
Q
_
Settings
_
$
User settings
-
_
$
Bluetooth
-
_
Enabled
¦_
Beacon
-
_
Mode
K
_
iBeacon
¥
_
The configuration menu will disable/gray out the options that are not appli-
cable with the selected Mode.
UUID
D9B9EC1F-3925-43D0-80A9-
K
_
¾
D9B9EC1F-3925-43D0-
Q
_

Unify OpenScape 4000 Specifications

General

Brand	Unify
Model	OpenScape 4000
Category	Telephone
Language	English