Unify OpenScape DECT Phone S6 Base

109
Protection against unwanted calls
DeutschEnglish
The black list is enabled when Silent Call or Block Call is selected as the protection mode.
Displaying/editing the black list
Transferring a number from a call list to the black list
Setting the protection mode
¤ . . . use to select Settings OK Telephony OK Black List
Edit Blocked Numbers OK . . . the list of blocked numbers is displayed . . . possible
options:
Create an entry:
¤ New . . . use to enter a number Save
Delete an entry: ¤ . . . use to select an entry Delete . . . the entry is deleted
¤ . . . use to select Call Lists OK . . . use to select Accepted calls/
Missed calls OK . . . use to select entry Options Copy to Blacklist OK
¤ . . . use to select Settings OK Telephony OK Black List
Edit Protection Mode OK . . . use to select desired protection
No Protection All calls are indicated, including from callers whose numbers are on
the black list.
Silent Call The telephone will not ring and the incoming call will only appear in
the display.
Block Call The telephone will not ring and the incoming call will not appear in
the display. The caller will hear the busy tone.
Save settings: ¤ Save