117
Repeater
DeutschEnglish
¤ . . . the list of handsets is opened, the current handset is highlighted with < . . .
use to select a handset . . . possible options:
Repeater
A repeater increases the receiving range between the Gigaset handset and the base station.
The registration procedure for a repeater depends on the version of the repeater being used.
• Repeater without encryption, e.g. Gigaset repeater prior to Version 2.0
• Repeater with encryption, e.g. Gigaset repeater later than Version 2.0
Further information about the Gigaset repeater can be found in the repeater user guide and at
www.gigaset.com.
Repeater without encryption
Activate Maximum Range/deactivate No Radiation
Deactivate encryption
Registering a repeater
¤ Connect the repeater to the mains power supply Press and hold the Registration/paging
key on the telephone base station (min. 3 secs) . . . the repeater is automatically registered
It is possible to register more than one Gigaset repeater.
Repeater with encryption
Registering a repeater
¤ Connect the repeater to the mains power supply Press and hold the Registration/paging
key on the telephone base station (min. 3 secs) . . . the repeater is automatically registered
Up to 2 repeaters may be registered.
The ECO DECT function Maximum Range is activated and the No Radiation function is
deactivated. The settings cannot be changed whilst the repeater is registered.
Edit name: ¤ Options Rename OK . . . use to delete the current
name . . . use to enter a new name OK
Edit number: ¤ Options Edit Handset No. OK . . . use to select a
number Save
¤ . . . use to select Settings OK ECO DECT OK Maximum
Range Change ( = activated) No Radiation Change ( = deactivated)
¤ . . . use to select Settings OK System OK Encryption
Change ( = deactivated)
Encryption is activated (default setting).
To Next Page
Loading...
Need help?
General