116
Multiple handsets
De-registering the handset
If the handset is still registered to other bases, it switches to the base with the best reception
(Best Base).
Locating a handset (Paging)
¤ Briefly press the Registration/paging key on the base station.
All handsets will ring at the same time (paging), even if ringtones are
switched off.
Ending the search
¤ Briefly press the registration/paging key on the base station
or Press the End call key on the handset
or Press the display key Silence on the handset
or No action. After approx. 30 seconds, the paging call will end
automatically.
Changing the handset name and internal number
When registering multiple handsets, they will automatically be assigned the names INT 1,
INT 2 etc. Each handset will automatically be assigned the lowest unassigned internal number.
The internal number is shown as the name of the handset on the display e.g. INT 2. You can
change the names and the numbers of handsets. The name must not exceed 10 characters in
length.
¤ . . . use to select Settings OK Registration OK Select Base
OK . . . possible options:
Change active base station:
¤ . . . use or Best Base to select base station Select
( = selected)
Best Base: The handset chooses the base station with the best
reception as soon as it loses connection to the current base station.
Change name of a base station:
¤ . . . use to select a base station Select ( = selected)
Name change name Save
¤ . . . use to select Settings OK Registration OK De-register
Handset OK . . . the handset being used is selected . . . use to select a different
handset if desired OK . . . enter system PIN if desired OK . . . confirm de-registration
with Ye s
Paging
Silence
To Next Page
Loading...
Need help?
General