86
Getting to know your telephone
Using the telephone
Getting to know your telephone
Switching the handset on/off
Locking/unlocking the keypad
The keypad lock prevents any accidental use of the telephone.
Lock/unlock the keypad: Press and hold
Keypad lock activated: the symbol appears in the display.
Control key
In the description below, the side of the control key (up, down, right, left) that you have to press
in the different operating situations is marked in black, e.g. for "press right on the control
key" or for "press the centre of the control key".
When the phone is idle
In submenus, selection and entry fields
During a call
Switch on: ¤ Press and hold the End call key on the handset when switched off
Switch off: ¤ When the telephone is in idle status, press and hold the End call key
If a call is indicated on the handset, the keypad automatically unlocks and you can
accept the call. It then locks again when the call is finished.
The control key enables you to navigate the menus and input fields, and also to
call up certain functions depending on the situation.
Open the main menu or
Open the directory Press briefly
Open the list of handsets
Set the voice volume for receiver / handsfree function
Confirm a function
Navigate a line up/down /
Select an option, move the cursor to the left/right /
Open the directory
Mute the microphone Press briefly
Initiating an internal consultation call
Change the voice volume for receiver / handsfree function
To Next Page
Loading...
Need help?
General