112
Bluetooth
Editing the list of known (trusted) devices
Open the list
If a device is connected, the relevant icon is shown in the display header instead of .
Edit an entry
Rejecting/accepting a non-registered Bluetooth device
If a Bluetooth device that is not registered in the list of known devices tries to connect to the
handset, a prompt will appear asking you to enter the PIN of the Bluetooth device (Bonding).
Changing the Bluetooth name of the handset
The handset is shown by this name on another Bluetooth device.
Showing information:
¤ . . . use to select a device, if applicable View . . . the device
name and device address are displayed
Repeat search: ¤ Options Repeat Search OK
Cancel search:
¤ Cancel
¤ . . . use to select Bluetooth OK Known Devices OK . . . the known
devices are listed, an icon indicates the type of device
Bluetooth headset
Bluetooth data device
¤ . . . use to select Bluetooth OK Known Devices OK . . . use
to select entry . . . possible options:
View an entry: ¤ View . . . the device name and device address are displayed
Press OK to go back
De-registering a device:
¤ Options Delete entry OK
Edit name: ¤ Options Edit Name OK . . . use to edit name Save
If an active Bluetooth device is de-registered, it may try to re-connect as a "non-
registered device".
Reject: ¤ Briefly press the End call key
Accept: ¤ . . . use to enter the PIN of the Bluetooth device to be
accepted OK . . . Wait for PIN confirmation . . . then
Add the device to the list of known devices: Ye s
use the device temporarily: No . . . the Bluetooth connection can be
used, as long as the device is located within transmission range or until
it is switched off
¤ . . . use to select Bluetooth OK Own Device OK . . . the name and
the device address are shown Change . . . use to change the name Save
To Next Page
Loading...
Need help?
General