129
System
DeutschEnglish
Resetting system PIN
Resetting the base station to the original PIN 0000:
¤ Unplug the network cable from the base station Press and hold the Registration/Paging
key on the base station At the same time reconnect the network cable to the base
station Press and hold the key for at least 5 secs . . . the base station is reset and the system
PIN is set to 0000
Restoring the phone to default settings
When the settings are reset
• the date and time are retained,
• handsets are still registered,
• the system PIN is retained,
• Maximum Range is activated and No Radiation is deactivated.
¤ . . . use to select Settings OK System OK System PIN
OK use to enter the current PIN (if other than 0000) OK use to enter new
system PIN Save
All handsets are de-registered and must be re-registered. All settings are returned to
default settings.
¤ . . . use to select Settings OK System OK Base Reset
OK use to enter system PIN OK Ye s . . . the base station is restarted. The restart
takes around 10 seconds
To Next Page
Loading...
Need help?
General