Unify OpenScape DECT Phone S6 User Manual

Handset 39
Fast access to numbers and functions
Assigning a number to digit keys (quick dial)
It is possible to assign a number from the directory to the keys and to .
¤ Press and hold the digit key
or
¤ Briefly press the digit key Press the display key QuickDial
The directory opens.
¤ . . . use to select an entry OK . . . use to select a number if necessary OK . . . the entry is
saved to the digit key
Dialling a number
¤ Press and hold the digit key . . . the number is dialled immediately
or
¤ Briefly press the digit key . . . the number/name (possibly in abbreviated form) is shown on the left
display key . . . press the display key . . . the number is dialled
Changing the digit key assignment
¤ Briefly press the digit key Change . . . the directory is opened . . . possible options:
Assigning display keys / Changing assignments
The left and right display keys have a function preset by default when in idle mode. The key can be re-
assigned.
¤ Press and hold the left or right display key in idle status . . . the list of possible key assignments is
opened . . . Use to select the function OK . . . The assignment of the display key is changed
Possible functions: Alarm Clock, Redial, Handset Directory . . . More functions are available in More
Functions...
Starting a function
With the telephone in idle status: Briefly press . . . the assigned function is executed
Changing the handset PIN
The handset is protected against unauthorised use by a PIN. The handset PIN must be entered e. g. when
switching off the keypad lock.
Change the handset's 4-digit PIN (default setting: 0000):
¤ . . . use to select Settings OK System OK Handset PIN OK . . .
use to enter the current PIN OK . . . use to enter the new handset PIN OK
Resetting a handset
Reset any individual settings and changes that you have made.
A number has not been assigned to the digit key.
If the entry in the directory is deleted later, this will not affect the assignment of the
digit key.
Change the assignment:
¤ . . . use to select an entry OK . . . select a number if
required OK
Delete the assignment:
¤ Clear Key
¤ . . . use to select Settings OK System OK Handset Reset
OK Yes . . . the handset's settings are reset
The following settings are not affected by a reset
• Registration of the handset to the base station
• Date and time
• Directory entries and call lists

Unify OpenScape DECT Phone S6 Specifications

General

Brand	Unify
Model	OpenScape DECT Phone S6
Category	Telephone
Language	English