How to fix no reaction to keystroke on Unify Telephone?
If your Unify Telephone does not react to keystrokes, it could be because the keypad lock is activated or a key is stuck. Press the hash key until you receive confirmation to deactivate the keypad lock, and ensure that no keys are stuck.
Why does my Unify Telephone say 'incomplete!'?
If your Unify Telephone displays 'incomplete!', it could be due to exceeding the maximum input time or not pressing the On-hook key. To resolve this, avoid long pauses between keystrokes and ensure you press the On-hook key.
Why does my Unify Telephone say 'Feature not avail. or: Incorrect entry. or: Key not programmed.'?
If your Unify Telephone displays 'Feature not avail. or: Incorrect entry. or: Key not programmed.', it indicates that the speed-dial number is unavailable, the appointment was entered incorrectly, the entry is blocked or not allowed, a prerequisite is not fulfilled, or the number dialed was incomplete. Correct your input, select a permitted option, and enter the phone number in full.
What does it mean when my Unify Telephone says 'PIN incorrect'?
If your Unify Telephone displays 'PIN incorrect', it means that you have entered the wrong PIN. Enter the correct PIN to proceed.
What to do if Unify Telephone shows 'Not available' after dialing?
If your Unify Telephone displays 'not available', it means that the phone number was not fully entered, or the star or hash key was not pressed. Enter the phone number correctly or as prescribed.
Why does my Unify IP Phone display 'no access'?
The 'no access' message on your Unify IP Phone indicates that a blocked function was called. Apply to the relevant service personnel for the COS for the blocked function.
Why does my Unify IP Phone display 'PIN incorrect'?
The 'PIN incorrect' message on your Unify IP Phone indicates that an incorrect PIN was entered. To resolve this, simply enter the correct PIN.
What to do if my Unify IP Phone displays 'protected'?
If your Unify IP Phone displays 'protected', it means a data transfer is currently active. Please wait and try again later.
What to do if Unify Telephone shows 'Base 1 Outgoing and incoming calls and activation/deactivation are not possible.'?
If your Unify Telephone displays 'Base 1 Outgoing and incoming calls and activation/deactivation are not possible.', it indicates that the handset is blocked. Remove the batteries from the handset and then re-insert them to resolve this issue.
How to fix no display on my Unify Telephone?
If there is no display on your Unify Telephone, the handset might not be switched on, or the batteries may be empty. Press the On-hook key until you receive confirmation. If that doesn't work, charge or replace the batteries.
General| Network Technology | GSM |
|---|---|
| GPRS | Class 10 |
| EDGE | Class 10 |
| Status | Discontinued |
| SIM | Mini-SIM |
| Type | TFT, 256K colors |
| Call records | Yes |
| Card slot | No |
| Loudspeaker | Yes |
| 3.5mm jack | No |
| Radio | No |
| Java | Yes, MIDP 2.0 |
| Battery | Removable Li-Ion 1000 mAh battery |
| Stand-by | Up to 200 h |
| 2G bands | GSM 900 / 1800 |
| Size | 1.8 inches |
| Resolution | 128 x 160 pixels |
| Phonebook | Yes |
| Alert types | Vibration; Polyphonic, MP3 ringtones |
| Messaging | SMS, MMS |
| Browser | WAP 2.0 |
| Games | Yes |
| Colors | Black |
Guidelines for using handsets in potentially explosive atmospheres.
Safety precautions for handset operation, including battery and charging.
Important attention and caution notes for handset and accessory usage.
Specific safety requirements for personal alarm functionality.
Information on proper disposal of electrical equipment.
Detailed layout of handset buttons, keys, ports, and indicators.
Explanation of the handset's personal alarm features and modes.
Steps for unpacking and preparing the handset for first-time use.
Detailed explanation of function, control, and display keys.
Core procedures for making, receiving, and ending calls.
How to activate and use the speakerphone function for calls.
Instructions for using corded and cordless headsets.
Steps to connect and register Bluetooth headsets.
Features for managing multiple calls and users simultaneously.
Activating and deactivating participation in call groups.
Configuring calls to ring on multiple telephones.
How incoming calls are distributed within a team.
Understanding alarm states and sensor inputs.
Using the alarm key and managing pre-alarm signals.
Overview of manual and automatic alarm types.
How to activate and manage monitoring functions.
Steps for sending emergency signals and calling for assistance.
Performing tests before using alarm modes.
Solutions for common handset malfunctions.
Detailed technical data, battery info, usage, and charging times.
Information on accessories, EU directives, and text editing.
Connecting handset to PC and transferring data.
Regulatory compliance statements for the device.
To Next Page
