Conducting calls – enhanced functions 55
Deactivating call forwarding to a "trunk"
c or d Press and hold the Talk or Speakerphone key.
Open the system menu.
> < [ Select the menu item and confirm.
> < [ Select the menu item and confirm.
o Follow the user guidance system from this point onwards (enter a multiple sub-
scriber number or DID and forwarding type).
[ Confirm your entries.
a Press the On-hook key to end the operation.
Using night service
In night service mode, for example, during lunch breaks or after office hours, all
external calls are forwarded to a particular internal telephone (night station). The
night station can be defined by the service engineer (= standard night service)
or by you (= temporary night service). When night service is active, the night sta
-
tion assumes the function of the intercept station.
Activating night service
Prerequisite: A service engineer must have activated the function for you.
c or d Press and hold the Talk or Speakerphone key.
Open the system menu.
> < [ Select the menu item and confirm.
Either:
> < [ Select the menu item and confirm.
"Standard night service" is configured.
Or:
o Enter your internal station number.
Save the settings.
"Temporary night service" is configured.
a Press the On-hook key to end the operation.
Deactivating night service
c or d Press and hold the Talk or Speakerphone key.
Open the system menu.
> < [ Select the menu item and confirm.
a Press the On-hook key to end the operation.
To Next Page
Loading...
Need help?
General
