26 Conducting calls – the basic functions
Callback
This function enables you to call a user who does not answer or whose line is
busy. The Callback function enables you to contact him as soon as he hangs up
or re-uses his telephone. Please note that a line is signalled as busy when it is
being called by another user. You can continue to use your handset without re
-
striction when a callback has been booked.
You can also send a callback request as a message Page 75. This function
can also be called by entering the code Page 107.
Booking a callback
p The number is dialled. You hear the busy tone or the user does not answer.
Save the callback request.
a Press the On-hook key to end the operation.
You receive a callback
You will receive the callback as soon as the user you want has hung up or the
first time he uses his telephone. The following appears on your handset display
"Callback:...".
c or d Press the Talk or Speakerphone key briefly. The connection is set up.
Deleting a callback request
c or d Press and hold the Talk or Speakerphone key.
Open the system menu.
> < [ Select the menu item and confirm.
> < [ Select the menu item and confirm.
> < [ Select the menu item and confirm.
> < Select the entry.
Open the additional menu.
> < [ Select the menu item and confirm.
a Press the On-hook key to end the operation.
Callbacks are repeated until a connection is established or until the call-
back is deleted. A handset can initiate up to five callbacks and can be the
destination for up to five callback requests. If these conditions are met,
any further callbacks are rejected.
To Next Page
Loading...
Need help?
General
