Group functions 69
UCD (Universal Call Distribution)
This function enables calls to be distributed in a team. An incoming call is always
delivered to the team member who has been idle longest. Team members can
also work in separate rooms, for
example, on the company's premises and at a
teleworking station. The teams (call distribution groups) and team members are
set up by the service engineer.
Logging on/off
You must log on and off at the system when you start/finish work.
Register
c or d Press and hold the Talk key or press and hold the Speakerphone key.
Open the system menu.
> < [ Select the menu item and confirm.
> < [ Select the menu item and confirm.
> < [ Select the menu item and confirm.
o Enter your identifier number (assigned by the service engineer).
a Press the On-hook key to end the operation.
Logging off
c or d Press and hold the Talk key or press and hold the Speakerphone key.
Open the system menu.
> < [ Select the menu item and confirm.
> < [ Select the menu item and confirm.
> < [ Select the menu item and confirm.
a Press the On-hook key to end the operation.
Logging on/off temporarily
You can log on or off at the system temporarily, for example, during break times.
Register
c or d Press and hold the Talk key or press and hold the Speakerphone key.
Open the system menu.
> < [ Select the menu item and confirm.
> < [ Select the menu item and confirm.
> < [ Select the menu item and confirm.
a Press the On-hook key to end the operation.
Logging off
To Next Page
Loading...
Need help?
General
