Conducting calls – with multiple users 65
Connecting parties
As the conference convener, you can leave the conference and thereby connect
the other parties with each other. If you were previously connected with two or
more parties, the other parties remain in a conference. Otherwise, the remaining
two users conduct a one-to-one call.
p You are connected with two or more partners in a conference call.
Open the system menu.
> < [ Select the menu item and confirm. The first party is displayed.
a Press the On-hook key. You leave the conference; the remaining parties are
connected with each other.
Using the second call function
The second call is an incoming call that is signalled on your handset during a call
(call waiting) and that can be queried by you (for
example, Page 58).
A second call can be answered in the following call states:
• You are on a single call,
• You are on a consultation call,
• You are holding a conference,
• You are on a call which you intend to add to a conference,
• You are toggling between two partners.
To Next Page
Loading...
Need help?
General
